Dvd Not Reading on Windows 7 Dell 990
While installing a dissever version of Windows on your computer you may encounter an error bulletin – 'No device drivers were plant'. You are facing this error due to the wrong format of the partition where you want to install the Os. Follow these steps to format the drive in NTFS and solve the result-
Note: – If yous have inserted installation media from a USB port on your PC, try to re-plug to a USB 2.0 port. Many users take been benefited past this method and this works for them.
Method 1 – How to Fix No device drivers were found' while installing Windows
Follow these steps to solve the issue-
To attempt this set on your device, you will demand the Windows 10 DVD from which you had installed the Windows 10 on your reckoner). If you don't accept one, you lot have to create a bootable installation media from another computer.
As your computer boots from the Windows ten installation media, follow the next steps-
one. Subsequently some time, you will find the Windows 10 installation system booting in.
two. Click on "Next" to go along farther.
2. Now, click on "Repair your estimator" on the bottom left corner of the Recovery Environment.
three. Next, click on "Avant-garde options".
4. Click on the "Command Prompt".
5. Put your account countersign and click on "Continue".
six. In Control Prompt window, copy-paste these two commands one-by-one and striking Enter to execute both of the commands sequentially on your computer.
diskpart list disk
seven. To select the disk and clean information technology up, execute theses commands.
select disk your deejay no. clean [NOTE– Replace the " <your disk no.> " with the number beside the drive where yous want to install the OS.
For this reckoner, it is "Disk 0 ". And so the command volition be similar this-
select disk 0 ]
eight. At present, to create a new primary partition, copy-paste this command and then hit Enter.
create partition primary
ix. To quick-format the new partition, the same way copy-paste this control and so hit Enter.
format fs=ntfs quick
Close Command Prompt window.
x. Coming back to the Cull an pick window, click on "Turn off your PC."
Start your calculator and install the Os in the new division.
Method 2 – Setting partition to active
Follow these steps to solve the issue-
To attempt this set on your device, yous will need the Windows 10 DVD from which you had installed the Windows 10 on your computer). If you don't have i, you have to create a bootable installation media from another computer.
As your reckoner boots from the Windows ten installation media, follow the next steps-
one. Afterward some time, y'all volition notice the Windows 10 installation screen.
two. Click on "Side by side" button.
2. Now, click on "Repair your figurer" .
3. Now, click on "Avant-garde options".
four. Click on the "Command Prompt".
v. Put your business relationship password and click on "Continue".
half dozen. In Command Prompt window, re-create-paste these two commands one-past-one and hitting Enter to execute both of the commands sequentially on your reckoner.
diskpart
select deejay C
list partition
select partitioning C
agile
Delight annotation that if your Windows Bone is installed in any other drive , simply supervene upon C with that drive letter.
7. Now, restart your computer.
Fix 2 – Install the driver from USB
If the previous method didn't work out you tin can install the drivers from a USB bulldoze.
Step 1
1. Just download the latest SATA or AHCI driver from the manufacturer'south website.
ii. Plug in a USB bulldoze to your organisation.
three. Copy the downloaded driver file from your estimator to the USB drive.
4. Unplug it from your system.
You will need a bootable USB installation media for the farther installation process. You don't have 1? Simply create a bootable installation media.
STEP two
1. Put the installation media on your computer.
2. Once the 'No device drivers were plant' message appears on your screen, plug the USB drive containing the drivers.
3. Later that, click on "Load driver" or "Scan" to browse for the drivers.
four. Then, install the drivers on your computer.
This trick should prepare the issue.
Fix 3 – Utilize another USB port
You tin can use another USB port to install the device driver.
1. During the installation procedure, when the installer asks for a driver just click on "Cancel".
2. You will appear on the Welcome screen. Now, insert the USB bulldoze to a unlike port than the usual one.
3. Finally, click on "Install" to first the installation procedure.
This workaround has helped out a lot of people.
Your trouble should be solved.
Sambit is a Mechanical Engineer By qualification who loves to write near Windows 10 and solutions to weirdest possible bug.
Source: https://thegeekpage.com/no-device-drivers-were-found-windows-installation/
0 Response to "Dvd Not Reading on Windows 7 Dell 990"
Post a Comment